The weather around Bremerton, WA takes a very fast toll on blacktop. Between the constant winter moisture rolling off the Sound and those sudden dry summer stretches, your Asphalt Driveway takes a very heavy beating. Synergy Asphalt Bremerton sees it all the time on sloped lots up in Sheridan Park and down near Manette, where unprotected Asphalt turns gray, dries out, and starts to crumble way before its time.
Asphalt Sealcoating is not just about making your Asphalt pavement look dark and sharp again like it was freshly laid Asphalt. Asphalt Sealcoating provides a protective shield. Liquid Asphalt is naturally vulnerable to UV rays and petroleum spills. When you leave your Asphalt Driveway bare, water gets into microscopic cracks, expands when the temperature drops, and turns into full-blown potholes. Synergy Asphalt Bremerton applies a heavy-duty Asphalt Sealcoat that locks out moisture and blocks the sun from damaging your Asphalt.
Why Bremerton Weather Demands the Right Timing for Asphalt Sealcoating
You cannot just slap Asphalt sealer down whenever you feel like it. The Pacific Northwest climate dictates the schedule for Asphalt Maintenance. If you try to do Asphalt Sealcoating during a rainy week in November, the product will not cure properly and you will watch your money wash right down the gutter into the street. Synergy Asphalt Bremerton looks for those dry windows between late spring and early fall when temperatures stay warm enough for the emulsion to bond correctly with the aggregate in your Asphalt.
Older neighborhoods like Callow Hill often have Asphalt Driveways that have not seen a drop of Asphalt sealer in a decade. If the Asphalt surface is too oxidized, a simple coat will not cut it. You have to clean out the oil stains, fill the Asphalt cracks, and make sure the Asphalt base is solid first. Otherwise, you are just putting a temporary fix on a broken surface.
What to Expect When Synergy Asphalt Bremerton Seals Your Asphalt Driveway
When Synergy Asphalt Bremerton comes out to a residential job for Asphalt Sealcoating, the process is straightforward but it requires patience. First comes the deep cleaning of the Asphalt Driveway. We blow off debris, scrub stubborn moss, and degrease any spots where your old truck has been leaking oil. If the Asphalt surface is not spotless, the Asphalt sealer will not stick.
- Thorough Asphalt surface cleaning and weed removal
- Professional Asphalt crack filling to stop water infiltration
- Application of commercial-grade Asphalt Sealcoat
Once the Asphalt Sealcoat product goes down, you have to stay off the Asphalt Driveway. Give the Asphalt Sealcoat at least 24 to 48 hours to cure fully depending on the humidity and shade. Driving on the Asphalt too soon leaves tire scuffs that are very difficult to get rid of.
Keeping up with Asphalt Sealcoating every few years is much cheaper than ripping out your whole Asphalt Driveway and starting over. Synergy Asphalt Bremerton provides Asphalt Sealcoating services for homes in Bremerton, WA. For Bremerton homes, Synergy Asphalt Bremerton is here for all your Asphalt Maintenance needs.